The following colors can be ordered at no additional charge. Products ordered in these colors cannot be returned.
Please note: Colors and finishes may vary. Printed samples may appear different than digital images.
Madix offers several optional coatings to provide customers with additional color choices. A minimum upcharge will apply when choosing optional colors. Each product in the Madix Catalogs that will accept an optional color will have a per piece color upcharge located in the Pricing Guides.
Please note: Color and printed samples may vary from actual painted products. Request color chip if exact match is required. Clear coat finish may vary in color due to substrate material
“HPL” should be specified for wear (horizontal) surfaces or for small volume requirements where Thermofused materials are not available. HPL has high wear and is impact resistance.
All Madix wood products use low-VOC, low-Formaldehyde substrates and adhesives and comply with California Air Resources Board Regulations. Products may qualify for LEED credits under 4.3,4 Environmental Quality, 4.1,2 Recycled Materials, and 6.0 Rapidly Renewable Resources.
Selections refer to thick [5/8" (15.9 mm) or thicker] panels used for counters, end panels, etc. Back Panels [1/4" (6.4 mm)] selections may vary – inquire through Customer Service for specific requirements.
Thermofused panels are ideal for non-wear surfaces and have substantial impact and wear characteristics compared to melamine panels previously available. The product is produced using hot press laminating polyester or melamine resin impregnated self-bonding paper to wood substrate. Performance specifications are available from the American Laminations Association. Madix does not recommend the use of Thermofused panels on horizontal or other wear surfaces.
Thermofused Panel and High Pressure Laminate samples may vary from actual products. Request sample if exact match is required.