Sales Assistance »
  • Omega Merchandising SystemUltimate Merchandising System | by Madix, Inc.
  • Omega Merchandising System

    Ultimate Merchandising System

    Omega Merchandising System is best utilized as a customizible merchandising addition to our Pallet Rack system. The Omega Merchandising System adds functionality and efficiency, as an innovative solution in mass merchandising operations.

    Omega by Madix, Inc. Wood and Wire Decks Molding Racks
    • Components for Omega Merchandising System

      Reveal/Hide Components
      Omega by Madix, Inc.

      Omega Frame

      • Slotted for beam adjustment in 2" (51 mm) increments
      • Welded construction
      • Upper and Lower channels accept Omega Upright with 1" (25 mm) adjustments
      • Heavy duty diagonals and footplates
      Part Number: O2F(NH)(ND)
      • O2F......Omega Frame
      • NH......Nominal Height 96" to 192" in 24" increments (2438 mm to 4877 mm in 610 mm increments)
      • ND......Nominal Depth 36" to 48" in 6" increments (914 mm to 1,219 mm in 152 mm increments)
      O2F(NH)(ND)-Omega Frame
      To preclude overturning, the frame depth x 6 cannot exceed the height of the topmost loaded beam pair, unless all the frames are properly anchored or braced externally

      Omega Upright

      • Supports backs, spanners, and standard shelving and accessories
      • Must be used with Omega Upright Support Bracket
      • Must be anchored to the floor
      Part Number: OU(NH)
      • OU......Omega Upright
      • NH......Nominal Height 78" to 90" in 6" increments (1,981 mm to 2286 mm in 152 mm increments)
      OU(NH)-Omega Upright

      Omega Floating Upright Support Bracket

      • Supports backs, spanners, and standard shelving and accessories
      • Must be used with Omega Upright
      Part Number: MOUSB-(ND)-F
      • MOUSB......Omega Floating Upright Support Bracket
      • (ND)-F......Nominal Depth 36” to 48” in 6” increments (914 mm to 1219 mm in 152 mm increments)
      MOUSB-(ND)-F-Omega Floating Upright Support Bracket

      Omega Frame Upright

      • Use with Omega Frame when standard shelving, backs or accessories are used
      Part Number: OFU(NH)
      • OFU......Omega Frame Upright
      • NH......Nominal Height 78" to 90" in 6" increments (1981 mm to 2286mm in 152 mm increments)
      OFU(NH)-Omega Frame Upright

      Omega Box Beam

      • Can accommodate particle board, Wire Grid Deck, or 2" (51 mm) dimensional board decking
      • Use only with Omega Tie Bars and Omega Deck Top
      Part Number: O2BB(NH)(NW)
      • O2BB......Omega Box Beam
      • NH......Nominal Height 50" (1270 mm)
      • NW......Nominal Width 36" to 108" in 12" and 24" increments (1981 mm to 2743 mm in 152 mm increments)
      O2BB(NH)(NW)-Omega Box Beam

      Omega Display Beam

      • Uses Omega Deck Supports
      • Accepts Wire Grid Decks or particle board decks
      Part Number: O2DB(OPT)(NL)HD
      • O2DB......Omega Display Beam 2" OC (51 mm)
      • OPT......F=Front R=Rear
      • NL......Nominal Length 0447=4' (1219 mm) ......0687=6' (1829 mm) ......0807=7' (2134 mm) ......0927=8' (2438 mm) ......1047=9' (2743 mm)
      • HD......Heavy-Duty
      O2DB(OPT)(NL)HD-Omega Display Beam

      Omega Tubular Deck Support

      • Load bearing pallet support
      • Fits flush with top of beam
      • Rests on top of beam step
      Part Number: MOTDSF(ND)
      • MOTDSF.....Omega Tubular Deck Support
      • F......Flush
      • ND......Nominal Depth 36", 42", & 48" (914 mm, 1066 mm, & 1219 mm)
      MOTDSF(ND)-Omega Tubular Deck Support

      Omega Deck Frame Support

      • To be used with full frame depth Decks and two front display beams only
      Part Number: OFDS(ND)
      • OFDS......Omega Deck Frame Support
      • ND......Nominal Depth 36" to 48" in 6" increments (914 mm to 1066 mm in 152 mm increments)
      OFDS(ND)-Omega Deck Frame Support

      Omega Deck Shelf Support

      • Use only with Omega Deck Shelf
      • Use only with a front and rear display beam
      Part Number: OSDS(ND)
      • OSDS......Omega Deck Shelf Supports
      • ND......Nominal Depth 18" to 34" in 2" increments (457 mm to 864 mm in 51 mm increments)
      OSDS(ND)-Omega Deck Shelf Support

      Lower Spanner

      • “Snap-in” spanner secures uprights at equal spacing and supports back panels
      • Electrical knockouts
      Part Number: SL-(NW)
      • SL......Lower Spanner
      • NW......Nominal Width 3' or 4' (914 mm or 1219 mm)
      SL-(NW)-Lower Spanner

      Splicer Spanner

      • Splicer spanner joins two back panels in sections 78" (1981 mm) and above
      • Electrical and Telescoping Upright knockouts
      Part Number: SS-(NW)
      • SS......Splicer Spanner
      • NW......Nominal Width 3' or 4' (914 mm or 1219 mm)
      SS-(NW)-Splicer Spanner

      Center Spanner

      • Galvanized “snap-in” spanner assures back panel rigidity
      • Electrical and Telescoping Upright knockouts
      • Galvanized only
      Part Number: SC-(NW)
      • SC......Center Spanner
      • NW......Nominal Width 3' or 4' (914 mm or 1219 mm)
      SC-(NW)-Center Spanner

      Top Spanner

      • “Snap-in” spanner secures uprights at equal spacing, traps back panels and trims top of section
      • Electrical and Telescoping Upright knockouts
      Part Number: STL-(NW)
      • STL......Top Spanner
      • NW......Nominal Width 3' or 4' (914 mm or 1219 mm)
      STL-(NW)-Top Spanner

      Pegboard Back

      • Back nominal height (NH) should match Basic Upright height
      Part Number: BP-(NW)(NH)
      • B......Back
      • P......Pegboard
      • NW......Nominal Width 3' or 4' (914 mm or 1219 mm)
      • NH......Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)
      BP-(NW)(NH)-Pegboard Back

      Pegboard Back Extension

        Part Number: BXP-(NW)(NH)
        • BX......Extension Back
        • P......Pegboard
        • NW......Nominal Width 3' or 4' (914 mm or 1219 mm)
        • NH......Nominal Height 6" to 54" in 6" increments (152 mm to 1372 mm in 152 mm increments)
        BXP-(NW)(NH)-Pegboard Back Extension

        Omega Back-to-Back Connector

        • Keeps back to back runs spaced properly
        • Use two connectors on frames 96" (2438 mm) high and three on taller units
        • Includes all hardware
        Part Number: OBBC-(SPACING)
        • OBBC......Omega Back to Back Connector
        • SPACING.....Spacing 6" to 12" in 1" increments (152 mm to 305 mm in 25 mm increments)
        OBBC-(SPACING)-Omega Back-to-Back Connector

      Omega Wood and Wire Decks

      Omega Wood and Wire Shelves by Madix, Inc.
      • Omega Wood and Wire Decks Components

        Omega Deck

        • Use as a full frame depth deck at the bottom or intermediate level
        • Use only with two Omega Display Beams, Front and Omega Deck Supports
        • Cannot be used in sections where backs are used
        Part Number: OD(ND)(NL)-(TYPE)
        • OD......Omega Deck
        • ND......Nominal Frame Depth 34", 40", 46" (914 mm, 1016 mm, 1168 mm)
        • NL......Nominal Beam Length 36", 48", 72", 84", 96", 108" (914 mm, 1219 mm, 1829 mm, 2438 mm, 2743 mm
        • U......U=Unsealed S=Sealed
        OD(ND)(NL)-(TYPE)-Omega Deck

        Omega Deck Regular Duty Top

        • Full frame width deck for use only with Omega Box Beams and Tie Bars
        • Industrial grade 5/8" particle board
        Part Number: MODTMS(ND)(NL)-RD-(TYPE)
        • MODTMS...Omega Deck Top
        • ND......Nominal Frame Depth 34", 40", 46" (914 mm, 1016 mm, 1168 mm)
        • NL......Nominal Beam Length 36", 48", 72", 84", 96", 108" (914 mm, 1219 mm, 1829 mm, 2438 mm, 2743 mm
        • TYPE......U=Unsealed S=Sealed
        MODTMS(ND)(NL)-RD-(TYPE)-Omega Deck Regular Duty Top

        Omega Deck Half Bottom

        • Full frame depth Deck on two Omega Front Beams and the OFDS(ND)-HD Deck Support
        • Fits between the Omega Frame Upright and the Omega Upright
        • Use with or without back panels
        Part Number: ODHB(ND)(NL)-(TYPE)
        • ODHB......Omega Deck Half Bottom
        • ND......Nominal Frame Depth 34", 40", 46" (914 mm, 1016 mm, 1168 mm)
        • NL......Nominal Beam Length 36" or 48" (914m or 1219 mm)
        • TYPE......U=Unsealed S=Sealed
        ODHB(ND)(NL)-(TYPE)-Omega Deck Half Bottom

        Omega Deck Shelf

        • Partial frame depth deck fits one Omega Beam Front and one Omega Beam Rear plus Omega Shelf Deck Support
        • Only use at intermediate levels
        • Fits between Aisle Display Beam, Omega Upright and back panel
        Part Number: ODS(ND)(NL)-(TYPE)
        • OD......Omega Deck
        • S......Shelf
        • ND......Nominal Frame Depth 18" to 34" in 2" increments (457 mm to 864 mm in 51 mm increments)
        • NL......Nominal Beam Length
        • TYPE......U=Unsealed S=Sealed
        ODS(ND)(NL)-(TYPE)-Omega Deck Shelf

        Omega Deck Shelf Bottom

        • Partial frame depth Deck
        • Use with two Omega Front Beams and Omega Deck Frame Support
        • Fits between Aisle Display Beam, Omega Uprights and back panel
        Part Number: ODSB(ND)(NL)-(TYPE)
        • OD......Omega Deck
        • SB......Shelf Bottom
        • ND......Nominal Frame Depth 18" to 34" in 2” increments (457mm to 864 mm in 51 mm increments)
        • NL......Nominal Beam Length 36" or 48" (914m or 1219 mm)
        • TYPE......U=Unsealed S=Sealed
        ODSB(ND)(NL)-(TYPE)-Omega Deck Shelf Bottom

        Omega Wire Grid Decks

        • Pieced for ease of handling
        • 5/16" (8 mm) sturdy gauge wire welded on 3" (76 mm) grid centers
        • Standard finishes: Silver Vein, Sahara, or Blue Gray
        • Order deck supports separately, 2 per piece
        • Both 72" (1829 mm) and 108" (2743 mm) decks come as two pieces
        Part Number: OWMS(ND)(NL)-3
        • O......Omega
        • WMS......Wire Grid Deck
        • ND......Nominal Frame Depth 36", 42", 48" (914 mm, 1067 mm, 1219 mm)
        • NL......Nominal Piece Length 24", 36", 48", 72", 108" (610 mm, 914 mm, 1220 mm, 1829 mm, 2743 mm)
        • 3......Grid Size 3" OC (76 mm)
        OWMS(ND)(NL)-3-Omega Wire Grid Decks

      Omega Molding Rack

      Omega Molding Rack by Madix, Inc.
      • Omega Molding Rack Components

        Omega Molding Rack Beams

          Part Number: O2FMRB(NL)-02
          • O2......Omega 2" OC (51 mm)
          • FMRB......Molding Rack Beams
          • NL......Nominal Width 0327=36" (914 mm) 0447=48" (1219 mm) 0687=72" (1829 mm) 0807=84" (2134 mm) 0927=96" (2438 mm) 1047=108"(2743mm)
          • 02......Standoff 02 = 2" (51 mm) 08 = 8" (203 mm) 14 = 14" (356 mm)
          O2FMRB(NL)-02-Omega Molding Rack Beams

          Omega Retainer Beam

            Part Number: O2DBF(NL)-LD
            • O2......Omega 2" OC (51 mm)
            • DBF......Retainer Beam
            • NL......Nominal Beam Length 3', 4', 6', 7', 8', 9' (914 mm, 1219 mm, 1829 mm, 2134 mm, 2438 mm, 2743 mm)
            • LD......Light-Duty
            O2DBF(NL)-LD-Omega Retainer Beam

            Omega Molding Rack Beam Kit (not shown)

              Part Number: O2FMRK(NL)
              • O2......Omega 2" OC (51 mm)
              • FMRK......Molding Rack Beam Kit
              • NL......Nominal Beam Length 3', 4', 6', 7', 8', 9' (914 mm, 1219 mm, 1829 mm, 2134 mm, 2438 mm, 2743 mm)
              O2FMRK(NL)-Omega Molding Rack Beam Kit (not shown)

              Vertical Divider Arms

                Part Number: VDA-(NL)(TYPE)
                • VDA......Vertical Divider Arms
                • NL......Nominal Divider Length R=10"-18" (254 mm-457 mm) H=20"-30" (508 mm-762 mm)
                • TYPE......R=Regular-Duty H=Heavy-Duty
                VDA-(NL)(TYPE)-Vertical Divider Arms

                Threaded Vertical Divider Arms

                  Part Number: TVDA-(NL)(TYPE)
                  • TVDA......Threaded Vertical Divider Arm
                  • NL......R=6"-20" in 2" increments (152 mm-508 mm in 51 mm increments) H=12"-30" in 2" increments (305 mm-762 mm in 51 mm increments)
                  • TYPE......R=Regular-Duty H=Heavy-Duty
                  TVDA-(NL)(TYPE)-Threaded Vertical Divider Arms

                  Omega Garden Tool Front Beam

                    Part Number: O2GTFB-(NW)
                    • O2GTFB......Omega Garden Tool Front Beam
                    • NW......Nominal Width 0327=36" (914 mm) 0447=48" (1219 mm) 0567=60" (1524 mm) 0687=72" (1829 mm) 0807=84" (2134 mm) 0927=96" (2438 mm) 1047=108" (2743 mm)
                    O2GTFB-(NW)-Omega Garden Tool Front Beam

                    Garden Tool Hook (Single)

                      Part Number: WSSHD-24
                      • WSSHD......Garden Tool Hook (Single)
                      • 24......24" (610 mm)
                      WSSHD-24-Garden Tool Hook (Single)

                      Garden Tool Hook (Double)

                        Part Number: WSGTDH-24
                        • WSGT......Garden Tool
                        • DH......Double Hook
                        • 24......24" (610 mm)
                        WSGTDH-24-Garden Tool Hook (Double)

                        Omega Light Mounting Kit

                          Part Number: OLMK-2
                          • OLMK-2......Omega Light Mounting Kit
                          OLMK-2-Omega Light Mounting Kit

                          Sign Holder

                            Part Number: SHBBM-(NL)
                            • SHBBM......Sign Holder With Box Beam Mount
                            • NL......Nominal Stem Length 3", 6", or 12" (76 mm, 152 mm, or 305 mm)
                            SHBBM-(NL)-Sign Holder

                            Omega Wall Frame

                              Part Number: OWF(NH)(ND)
                              • O......Omega 2" OC (51 mm)
                              • WF......Wall Frame
                              • NH......Nominal Frame Height 96", 120", 144" (2438 mm, 3048 mm, 3658 mm)
                              • ND......Nominal Frame Depth 24" to 42" in 2" increments (610 mm to 1067 mm in 51 mm increments)
                              OWF(NH)(ND)-Omega Wall Frame