Lumibacks replace back panels in Madix's fixtures to improve the light adjacent to the merchandise on the fixtures or to provide back lighting for large format, in-store graphics that are embedded in the fixtures. The LED back, which uses little power, creates virtually no heat, lasts for years, and provides consistent light without the hot spots that commonly inflict illuminated signage. Having graphics built into the store fixtures is ideal for in-store marketing programs, promoting merchandising categories, brands, or the retailer itself. Retailers can convert any number of backs either in end caps or inline on perimeter wall and aisle runs.
Gallery
View Components »
Click to reveal available components. Click again to collapse.
Lumiback Panels
- Includes acrylic surface with integral LED lighting system and 5 foot long cord
- Effectively illuminates graphics or signage
- Lumibacks and extension backs are sized to work with standard Gondola back sizes– configurations combining pegboard, or other 1/4" (6 mm) material, backs and Lumiback extension backs are possible
- Power consumption is approximately 8 watts per vertical foot
- Order transformers, backs and adapter sets separately
- Reflector (-R) required for most applications, except where Single Centered and Triple Back Systems specified with centered Lumiback
- Requires use of Slatwall Center Spanner [SSC-(NW)]
Lumiback Single Side Back Panels
- Back panels for single sided applications installed in regular back panel location
LSSSB-(NW)(NH)-R
- LSSSB... Lumiback Single Sided Back
- NW... Nominal Width 3' or 4' (914 mm or 1219 mm)
- NH... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)
- R... Reflector
Lumiback Single Side Back Panel Extension
- Back panels for single sided applications installed in regular back panel location
LSSBE-(NW)(NH)-R
- LSSBE... Lumiback Single Sided Back Extension
- NW... Nominal Width 3' or 4' (914 mm or 1219 mm)
- NH... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)
- R... Reflector
Lumiback Triple Back Panels
LSSTB-(NW)(NH)-R
- LSSTB... Lumiback Triple Back
- NW... Nominal Width 3' or 4' (914 mm or 1219 mm)
- NH... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)
- R... Reflector
Lumiback Triple Back Panel Extension
LSSTBE-(NW)(NH)-R
- LSSTBE... Lumiback Triple Back Extension
- NW... Nominal Width 3' or 4' (914 mm or 1219 mm)
- NH... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)
- R... Reflector
Lumiback Panel Adapter Sets
- Back Adapter Set (required)
- Includes adapter channel for sides of panel
- Specify finish (recommended finish is match to upright)
Lumiback Single Back Panel Adapter Set
- Adapters for single sided applications installed in regular back panel location
LSBPAS-(NW)(NH)
- LSBPAS... Lumiback Back Panel Adapter Set
- NW... Nominal Width 36" or 48" (914 mm or 1219 mm)
- NH... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)
Lumiback Single Back Panel Adapter Set– Extension
- Adapters for single sided applications installed in extension back panel location
LSBPASE-(NW)(NH)
- LSBPASE... Lumiback Back Panel Adapter Set– Extension
- NW... Nominal Width 36" or 48" (914 mm or 1219 mm)
- NH... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)
Lumiback Back Panel Adapter Set– Single Track
- Adapters for single centered back applications
- Includes both side and top/bottom adapters
LSBPASS-(NW)(NH)
- LSBPASS... Lumiback Back Panel Adapter Set– Single Track
- NW... Nominal Width 36" or 48" (914 mm or 1219 mm)
- NH... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)
Lumiback Extension Back Panel Adapter Set– Single Track
- Adapters for single centered back applications installed in extension back panel
- Includes both side and top/bottom adapters
LSBPASES-(NW)(NH)
- LSBPASES... Lumiback Extension Back Panel Adapter Set– Single Track
- NW... Nominal Width 36" or 48" (914 mm or 1219 mm)
- NH... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)
Lumiback Back Panel Adapter Set– Triple Track
- Adapters for triple back applications
- Includes both side and top/bottom adapters
LSBPAST-(NW)(NH)
- LSBPAST... Lumiback Back Panel Adapter Set– Triple Track
- NW... Nominal Width 36" or 48" (914 mm or 1219 mm)
- NH... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)
Lumiback Extension Back Panel Adapter Set– Triple Track
- Adapters for triple back applications installed in extension back panel location
- Includes both side and top/bottom adapters
LSBPASET-(NW)(NH)
- LSBPASET... Lumiback Extension Back Panel Adapter Set– Triple Track
- NW... Nominal Width 36" or 48" (914 mm or 1219 mm)
- NH... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)
Transformers for LED Products
- Transformers are required for Lumicanopy, Lumishelf™, and Lumiback, ordered separately
- 60 watt capacity, 7.5 vertical feet
- Single transformer powers five 36" shelves and Lumicanopies
- UL/CE/CB Listed
- 60" AC power cord and 72" DC cord
- Maximum 20 transformers per 20 amp circuit
LSST5A
- LSST... Transformers for LED Products
- 5... 60 watts, 7.5 vertical feet
- A... Adapter
Spider Cables for LED Products
- LSS2WC and LSS6WC Spider Cables have connections approximately 6" OC and each lead is approximately 6" long
- LSS4WC Spider Cable has 60" leads, 60" OC
- Spider Cables can be utilized to connect multiple surfaces or backs to a single transformer
- Refer to transformer information for capacities
LSS(OPT)WC
- LSS... Spider Cables for LED Products
- OPT... 2 = 2 Connections 4 = 4 Connections 6 = 6 Connections
- WC... Wire Connectors
| Part Number | Connections |
| LSS2WC | 2 |
| LSS4WC | 4 |
| LSS6WC | 6 |
Downloads & Literature
Literature


