LEDge Light by Madix - Innovation on Display

LEDge Light is the first LED lighting product designed specifically for use on display shelves. Environmentally friendly LEDs produce light intensity similar to T5 fluorescent fixtures, while using only half the energy and lasting nearly three times as long without replacement or maintenance. LEDge Light produces virtually no heat, no UV rays (eliminating packaging degradation) and features a specially designed lens for optimal light distribution. Optional dimming controller with infrared sensors may reduce energy consumption by over 50% and double the life of the fixture.

Durable aluminum extrusion

Maintenance-free life in excess of 50,000 hours
(11 years at 12 hours/day)

Ideal for Shopper Marketing

Surface & Panel magazine recently conducted an in-depth study on the benefits of utilizing LED lighting. The article points out several key points that place LEDge Light at the peak end of the lighting spectrum.

Key points from the article

LEDge Light uses constant 24v power to sustain its quality lighting distribution.
The color temperature for LEDge Light is 4200K.
The CRI (Color Rendering Index) is based on a 0-100 scale. The higher the number, the better color rendering ability. LEDge Light's CRI is 85.

A Whole New World of Possibilities

The new LEDge Light Versa clips allow retailers to quickly and easily modify shelf spacing without the hassle of unplugging and reconnecting. Adjust shelves mounted with LEDge lights throughout the run without moving wires or electrical connections.

Hassle-free way to light an entire fixture run

Quickly tweak the layout of a gondola section

Versa Clips easily install to pre-existing LEDge light runs

Gallery

View Wiring Accessories »

Click to reveal available accessories. Click again to collapse.

Shelf Width	Part Number	Actual Length	Power Consumption	Max # Lights per 100 W Power Supply
24"	LLS24	22 1/2	4.8W	20
36"	LLS36	34 1/2	7.2W	13
48"	LLS48	46 1/2	9.6W	10

LEDge Light Harness Assembly

Harness Assembly is used to connect up to 6 LEDge Lights to a single 100W power supply
Up to 12 lights may be connected to a single Harness Assembly by using 2 power supplies
Harness plugs directly into power supply
Jumper Cables required to connect LEDge Lights to Harness Assembly
6 modules, 12.25" On Center with 72" leads for each power supply connection
Screw tab on each connecting module allows fastening to perfed back panel via push rivets or to other surfaces with screws (not included)
White color

LLHA

LLHA...LEDge Light Harness Assembly

LEDge Light Jumper Cable

Required to connect LEDge Lights to Harness Assembly and adjacent lights in daisy-chain applications
See above table for maximum number that can be connected to single 100W power supply
Available in 6", 18", 30", 72" and 144" lengths
White color

LLJ(NL)

LLJ...LEDge Light Jumper Cable
NL...Nominal Length 6", 18", 30", 72", 144" (152 mm, 457 mm, 762 mm, 1829 mm 3658 mm)

LEDge Light Power Supply

UL Listed 100W power supply features nearly 90% efficiency through use of latest circuitry design
120V standard plug– no electrician required
Maximum of 16 power supplies per 20 amp circuit
Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLPS

LLPS...LEDge Light Power Supply

LEDge Light Dimming Controller Kits

Dimming controllers use infrared sensors to dim or shut off LEDge Lights when customers are not shopping the aisle. Dimming is adjustable from off to 12%, 25%, or 50% of total intensity. State of the art control dims and ramps up light slowly, making the change less noticeable to customers. Use of dimming control may cut energy consumption by over 50% and double life of LEDge Light.

UL Listed 100W power supply features nearly 90% efficiency through use of latest circuitry design
120V standard plug– no electrician required
Maximum of 16 power supplies per 20 amp circuit
Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LEDge Light Dimming Controller Starter Kit

Controls single 100W power supply
Kit contains one dimming controller, two infrared sensors, cables and connectors for use in up to a 24' run (longer runs require Sensor Add-On Kit– see below)
Sensor detection range is 14' diameter
Specify sensor mounts for slotted upright (B) or shelf (S)
Plug 'n play connections– no electrician required
White color
Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLDCS-(TYPE)

LLDCS...LEDge Light Dimming Controller Starter Kit
TYPE...Sensor Mount Type:
- B=Slotted Upright
- S=Shelf

LEDge Light Dimming Controller Add-On Kit

Order this kit to control additional power supplies (one kit per power supply)
Contains one dimming controller, cables and connectors to add one power supply
Plug 'n play connections– no electrician required
White color
Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLDCA

LLDCA...LEDge Light Dimming Controller Add-On Kit

LEDge Light Motion Sensor Add-On Kit

Order this kit where additional sensors are required in system (at center of any run that exceeds 24')
Kit adds a single sensor to Starter Kit above
Contains one infrared sensor, cables and connectors to add 12' to run
Specify sensor mounts for slotted upright (B) or shelf (S)
Plug 'n play connections– no electrician required
White color
Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLMSA-(TYPE)