• Harness Assembly is used to connect up to 6 LEDge Lights to a single 100W power supply
• Up to 12 lights may be connected to a single Harness Assembly by using 2 power supplies
• Harness plugs directly into power supply
• Jumper Cables required to connect LEDge Lights to Harness Assembly
• 6 modules, 12.25" On Center with 72" leads for each power supply connection
• Screw tab on each connecting module allows fastening to perfed back panel via push rivets or to other surfaces with screws (not included)
• White color

LLHA

• LLHA...LEDge Light Harness Assembly

• Required to connect LEDge Lights to Harness Assembly and adjacent lights in daisy-chain applications
• See above table for maximum number that can be connected to single 100W power supply
• Available in 6", 18", 30", 72" and 144" lengths
• White color

LLJ(NL)

• LLJ...LEDge Light Jumper Cable
• NL...Nominal Length 6", 18", 30", 72", 144" (152 mm, 457 mm, 762 mm, 1829 mm 3658 mm)

• UL Listed 100W power supply features nearly 90% efficiency through use of latest circuitry design
• 120V standard plug– no electrician required
• Maximum of 16 power supplies per 20 amp circuit
• Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLPS

• LLPS...LEDge Light Power Supply

Dimming controllers use infrared sensors to dim or shut off LEDge Lights when customers are not shopping the aisle. Dimming is adjustable from off to 12%, 25%, or 50% of total intensity. State of the art control dims and ramps up light slowly, making the change less noticeable to customers. Use of dimming control may cut energy consumption by over 50% and double life of LEDge Light.

• UL Listed 100W power supply features nearly 90% efficiency through use of latest circuitry design
• 120V standard plug– no electrician required
• Maximum of 16 power supplies per 20 amp circuit
• Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LEDge Light Dimming Controller Starter Kit

• Controls single 100W power supply
• Kit contains one dimming controller, two infrared sensors, cables and connectors for use in up to a 24' run (longer runs require Sensor Add-On Kit– see below)
• Sensor detection range is 14' diameter
• Specify sensor mounts for slotted upright (B) or shelf (S)
• Plug 'n play connections– no electrician required
• White color
• Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLDCS-(TYPE)

• LLDCS...LEDge Light Dimming Controller Starter Kit
• TYPE...Sensor Mount Type:
  • B=Slotted Upright
  • S=Shelf

• Order this kit to control additional power supplies (one kit per power supply)
• Contains one dimming controller, cables and connectors to add one power supply
• Plug 'n play connections– no electrician required
• White color
• Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLDCA

• LLDCA...LEDge Light Dimming Controller Add-On Kit

• Order this kit where additional sensors are required in system (at center of any run that exceeds 24')
• Kit adds a single sensor to Starter Kit above
• Contains one infrared sensor, cables and connectors to add 12' to run
• Specify sensor mounts for slotted upright (B) or shelf (S)
• Plug 'n play connections– no electrician required
• White color
• Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™

LLMSA-(TYPE)

• LLMSA...LEDge Light Motion Sensor Add-On Kit
• TYPE...Sensor Mount Type:
  • B=Slotted Upright
  • S=Shelf

• Use to cleanly route cables
• Clear nylon with adhesive back
• 3/8" capacity
• 25 pieces per pack

LLCC38-25

• LLCC...LEDge Light Cable Clamp
• 38...3/8" capacity
• 25...25 pieces

LLDC

• LLDC...LEDge Light Dimming Controller

• 60" cord

LLMS

• LLMS...LEDge Light Motion Sensor

• Specify sensor mounts for slotted upright (B) or shelf (S)

LLSMB-(TYPE)

• LLSMB...LEDge Light Sensor Mounting Bracket
• TYPE...Sensor Mount Type:
  • B=Slotted Upright
  • S=Shelf

• Used to connect Motion Sensor to Dimming Controller
• Available in 3', 15', 25', and 50' lengths

LLC5C-(NL)

• LLC5C...LEDge Light Cat 5 Cable
• NL...Nominal Length 3', 15', 25', 50' (914 mm, 4572 mm, 7620 mm, 15,240 mm)

LLC5CP

• LLC5CP...LEDge Light Cat 5 Coupler

LLC5YS

• LLC5YS...LEDge Light Cat 5 Y-Splitter